1. Size of concrete specimens for compression axial strength test
Concrete cubic specimen: 150X150X300mm, 100X100X300mm, 200X200X400mm
Cylindrical concrete specimen: φ150X300mm, φ100X200mm, φ200X400mm
2. Brief introduction of concrete axial compressive strength test procedure
1) Placing the concrete specimen---place the test specimen on the lower bearing block erectly. Carefully align the axis of the specimen with the center of thrust of the spherically seated block.
2) Apply the load continuously and without shock until the specimen fails and record the maximum load carried by the concrete specimen during the test. Note the type of failure and the appearance of the concrete.
3. Software for concrete axial compressive strength test
3.1 Windows based interface, easy and fast to reach different functions, suitable for most of operators using habits.
3.2 The software provides multi functional control mode: Load (stress) control; Displacement (Stroke) control, Strain (Deformation) control, Load keeping, Displacement keeping, Customized programming control ect.
3.3 In stroke control mode, operator can define customized test speed to conform to different test standard. Preset limit position and return position will secure the safety and return the crosshead automatically after test finished. In program control mode, the testing machine is controlled by conditional programs, operator can input each condition to regulate test process, and software can realize constant parameter control through this function.
3.4 Realize the testing diagram online display and reproduction.
3.5 Zoom in or out the test diagram at any place with any rate.
3.6 Auto suit the diagram according to display resolution
3.7 Coordinates point tracing to check the test results in each point
3.8 The software provides different way to create test report: Single material test report, Batch material test report, Customized test report, Coordinates point test report
3.9 test curves: load-time, extension- time, load-displacement, load-extension, stress-strain,etc
4. Relative test method
GB/T 50081 standard for test method of mechanical properties on ordinary concrete
We specializes in the production and sales of electronic and hydraulic universal testing machine,electronic and hydraulic tensile testing machine, bending testing machine, horizontal tensile testing machine, impact Testing machine, concrete cement compression testing machine, compressive and flexural integrated testing machine, pellet compression testing machine, manhole cover compression testing machine, tensile stress relaxation testing machine, etc. Welcome your calling or visit